Toyota 2011 4Runner NAVIGATION SYSTEM - Dial by Name

14
CALLING BY VOICE RECOGNITION
DIAL BY NAME
Press on the steering wheel.
After the beep say, “Phone.”
step
1
Quick Tip - If you know your next command,
you can press
at any time to interrupt the
prompt. Speak your command after the beep.
After the beep say, “Dial by
Name.”
step
2
step
3
After the beep say the name from
the contact list.
After the beep, say “Dial” or
press
on the steering
wheel.
step
4
Call is active when
is indicated. To end call, press
on the screen or
on the steering wheel.
step
5
If you have diffi culty pairing your phone, or are unable to transfer your cell phone book, please
refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more
information about phone connections and compatibility. If you are able to successfully transfer
your phone book, you can dial by name using voice recognition. Please say the name exactly
as it is entered in your phone when in the telephone screen.
Quick Tip - If you know your next command,
you can press
at any time to interrupt the
prompt. Speak your command after the beep.