337
5-4. Other interior features
5
Interior features
4RUNNER (U)_(OM35A83U)
■
Deviation calibration
Stop the vehicle.
Change the accessory meter display to deviation calibration
mode by doing the following.
When the parking lights are
turned on:
Press and hold the “MODE/ ”
button.
A number (1 to 15) will appear
on the display.
When the parking lights are off:
In accessory meter light control
mode (P. 90), press and hold
the “MODE/ ” button.
A number (1 to 15) will appear
on the display.
Referring to the map above, press the “MODE/ ” or “SET/ ”
button to select the number of the zone you are in.
Press and hold the “SET/ ” button to confirm the number and to
exit deviation calibration mode. (If the button is pressed for more
than 6 seconds, the number will automatically be confirmed and the
display returned to normal.)
1
2
3
4
To Next Page
Loading...
