EasyManua.ls Logo

Toyota 2018 yaris - Page 182

Toyota 2018 yaris
520 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
182
4-5. Toyota Safety Sense C
Operational conditions
The pre-collision system is enabled and determines that the possibility of a
frontal collision with a vehicle is high.
Each function is operational at the following speeds:
Pre-collision warning:
Vehicle speed is approximately 10 to 86 mph (15 to 140 km/h).
The relative speed between your vehicle and a preceding vehicle is
approximately 10 mph (15 km/h) or more.
Pre-collision brake assist:
Vehicle speed is approximately 19 to 49 mph (30 to 80 km/h).
The relative speed between your vehicle and a preceding vehicle is
approximately 19 mph (30 km/h) or more.
Pre-collision braking:
Vehicle speed is approximately 7 to 49 mph (10 to 80 km/h).
The relative speed between your vehicle and a preceding vehicle is
approximately 7 mph (10 km/h) or more.
The system may not operate in the following situations:
If a battery terminal has been disconnected and reconnected and then the
vehicle has not been driven for a certain amount of time
If the shift lever is in R
If VSC is disabled (only the pre-collision warning function will be opera-
tional)
Cancelation of the pre-collision braking
If either of the following occur while the pre-collision braking function is
operating, it will be canceled:
The accelerator pedal is depressed strongly.
The steering wheel is turned sharply or abruptly.
If the vehicle is stopped by the operation of the pre-collision braking func-
tion, the operation of the pre-collision braking function will be canceled after
the vehicle has been stopped for approximately 2 seconds.

Table of Contents

Related product manuals