272
5-7. Connecting Bluetooth
®
When auto connection has failed or “Bluetooth* Power” is turned off,
you must connect the Bluetooth
®
device manually.
● Follow the steps in “Connecting a Bluetooth
* device” from step .
(→P. 271)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Registering an additional device
Select “Select Device” on the “Bluetooth
* Audio” screen.
For more information: →P. 26 9
Selecting a registered device
Select “Select Device” on the “Bluetooth
* Audio” screen.
For more information: →P. 27 1
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
■ Reconnecting a Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position, the system will automatically attempt to
reconnect.
If the system is attempting to connect to a Bluetooth
®
phone and the Bluetooth
®
phone is turned off and then back on, the system will attempt to reconnect.
Manual connection
Connecting a Bluetooth
®
audio player
1
1
2
1
2
To Next Page
Loading...
