83
Steel wheels
Aluminum wheels
The A.D.D. can be engaged or disen-
gaged by the shifting operations de-
scribed in “(c) Shifting procedure”.
You should drive in four-wheel drive for at
least 16 km (10 miles) each month. This
will assure that the front drive compo-
nents are lubricated.
SHIFTING BETWEEN “H2” AND “H4”
With free-wheeling hubs
To shift from “H2” to “H4”, move the
front drive control lever. Also, engage
both the free-wheeling hubs.
This can be done when the vehicle is
stopped, or moving straight ahead at
speeds of 40 km/h (25 mph) or less. You
need not depress the clutch pedal. If you
have trouble shifting, depress or release
the accelerator pedal momentarily while
pushing the front drive control lever.
Never move the front drive control
lever if wheels are slipping. Stop the
slipping or spinning before shifting.
CAUTION
!
To shift from “H4” to “H2”, simply move
the front drive control lever.
This can be done at any vehicle speed.
You need not depress the clutch pedal.
If the indicator light does not go off when
you shift the transfer into “H2”, drive
straight ahead while accelerating or de-
celerating, or drive in reverse.
(b) A.D.D. (automatic discon-
necting differential)
(c) Shifting procedure (lever
type with automatic transmis-
sion)
To Next Page