177
2-4. Using other driving systems
2
When driving
4RUNNER_U_(L/O_0808)
Four-wheel drive system (4WD models)
Use the four-wheel drive control switch and center differential lock
switch to select the following transfer and center differential modes.
n Four-wheel drive control switch
Multi-mode 4WD models
H2 (high speed position,
two-wheel drive)
Normal driving
H4 (high speed position,
four-wheel drive)
Greater traction than two
wheel drive.
When you experience a
loss of power, such as
wheel slipping.
The four-wheel drive indi-
cator will come on.
L4 (low speed position,
four-wheel drive)
Driving requiring maximum
power and traction such as
climbing or descending
steep hills, off-road driving,
and hard pulling in sand or
mud, etc.
The four-wheel drive and
4LO indicators will come
on.
4RUNNER_U.book Page 177 Wednesday, July 30, 2008 3:00 PM