36
1-2. Opening, closing and locking the doors
4RUNNER_U_(L/O_0808)
n Setting and canceling the functions
To sw i tc h be tw e en set ti ng a nd ca nc e li ng, fo llo w t he p r oc edu re
below:
Close all the doors and turn the engine switch to the ON posi-
tion. (Perform step 2 within 10 seconds.)
Set the parking brake.
Shift the shift lever to P or N,
press and hold the driver’s door
lock switch ( or ) for approx-
imately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set or can-
celed are shown as follows.
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
Function Shift lever position Switch position
Shift position linked door locking
function
P
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
N
Engine switch linked door
unlocking function
4RUNNER_U.book Page 36 Wednesday, July 30, 2008 3:00 PM
To Next Page
Loading...
