5
When trouble arises
447
5-2. Steps to take in an emergency
4RUNNER_U_(L/O_0808)
When connecting the jack han-
dle extensions, use the jack han-
dle to tighten the square head
bolt. Make sure that the bolt fits
into the depression on the joint.
When connecting the jack han-
dle extension with the jack han-
dle, tighten the round head bolt
by hand.
Insert the end of the jack handle
extension into the lowering
screw and turn it conterclock-
wise.
After the tire is lowered com-
pletely to the ground, remove
the holding bracket.
4RUNNER_U.book Page 447 Wednesday, July 30, 2008 3:00 PM
To Next Page
Loading...
