452
5-2. Steps to take in an emergency
4RUNNER_U_(L/O_0808)
Replacing an aluminum wheel
Tighten the nuts until the washer
of the nut comes into loose con-
tact with the disc wheel.
Lower the vehicle.
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
83 ft·lbf (110 N·m, 11.5 kgf·m)
Disc
wheel
Washer
4RUNNER_U.book Page 452 Wednesday, July 30, 2008 3:00 PM
To Next Page
Loading...
