25
19. REMOVE REAR SEAT SIDE GARNISH LH
(1) Disengage the 2 claws and 5 clamps, and
remove the rear seat side garnish LH.
20. REMOVE NO. 1 HYBRID BATTERY
INTAKE DUCT
(1) Remove the 3 clips and No. 1 hybrid battery
intake duct.
21. REMOVE NO. 4 HYBRID BATTERY
SHIELD PANEL
Caution:
Wear insulated gloves for the following 2
steps.
(1) Using the service plug grip, remove the battery
cover lock striker.
Hint:
Insert the projection of the service plug grip, and
turn the button of the battery cover lock striker
counterclockwise to release the lock.
(2) Remove the bolt, 2 nuts and No. 4 hybrid
battery shield panel.
Projection
Service Plug Grip
Turn
Button
Buttery Coven Lock Striker
To Next Page
Loading...
