26
22. DISCONNECT NO. 4 FLOOR WIRE
Caution:
Wear insulated gloves.
Notice:
Insulate the terminals of the removed frame
wire with insulating tape.
(1) Disconnect the 2 connectors shown in the
illustration.
(2) Disconnect the shielded wire ground and
disconnect the No. 4 floor wire.
23. REMOVE HV BATTERY
Caution:
Wear insulated gloves.
(1) Disconnect the connector and wire harness
clamp.
(2) Disconnect the 2 connectors.
(3) Remove the 6 bolts from the HV battery.
To Next Page
Loading...
