Toyota C-HR 2020 - Page 232

232
4-5. Using the driving support systems
C-HR_OM_USA_OM10634U
■
Enabling/disabling the pre-collision system
The pre-collision system can be enabled/disabled on the multi-
information display.
The system is automatically enabled each time the engine switch is
turned to the “ON” position (vehicles without a smart key system) or
turned to IGNITION ON mode (vehicles with a smart key system).
Press “” or “” of meter control switches and select .
Press “” or “” of meter control switches and select ,
and press .
Press “” or “” of meter control switches and select ,
and press to select the desired setting (on/off).
If the system is disabled, the
PCS warning light will turn on
and a message will be dis-
played on the multi-information
display.
Changing settings of the pre-collision system
1
2
3