415
7-2. Steps to take in an emergency
7
When trouble arises
C-HR_OM_USA_OM10634U
Take out the towing eyelet. (P. 437)
Remove the eyelet cover using
a flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
Insert the towing eyelet into the
hole and tighten partially by
hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench or hard metal bar.
Emergency towing procedure
1
2
3
4
To Next Page
Loading...
