Toyota Corolla Cross 2024 - Page 119

119
3-2. Opening, closing and locking the doors
3
Before driving
 7-inch display meter
2 Press or of meter con-
trol switches, select the
“Vehicle Settings” and then
press and hold .
3 Press or of the meter
control switches, select
“PBD” and then press .
4 Press or of the meter
control switches, and then
select “System Settings”.
5 ON and OFF will be switched
when is pressed.
When OFF is selected and the
operations of the power back door
is made to stop from the or
of multi-information display, unless
it is set to ON, the operation of the
power back door will not return. (No
return in the engine switch opera-
tion)
The open position of the power
back door can be adjusted.
1 Stop the power back door at
the desired position.
(P.114)
2 Press and hold the power
back door switch on the back
door for approximately 2 sec-
onds.
• When setting is complete, a
buzzer will sound 4 times.
• The next time the power back
door is opened, it will stop at
that position.
■ Returning the power back door
opening position to the default
setting
Press and hold the power back door
switch on the back door for approxi-
mately 7 seconds.
A buzzer will sound 4 times, pause,
and then sound 2 more times. The
next time the power back door is
opened, it will stop at the default
position.
■ When setting the open position
of the back door by the
multi-information display
The open position of the power back
door can be adjusted using the
multi-information display. (P.459)
When opened, the power back door
will open to the last position set
using the power back door switch on
the back door or on the multi-infor-
mation display.
Adjusting the open posi-
tion of the back door
(vehicles with a power
back door)