EasyManua.ls Logo

Toyota Corolla Cross 2024 - Page 324

Toyota Corolla Cross 2024
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
324
5-4. Other interior features
warm. This is not a malfunction.
If a portable device becomes warm
while charging and charging stops
due to the protection function of the
portable device, wait until the porta-
ble device cools down and charge it
again.
Also, to decrease the temperature
inside the wireless charger, a fan
may operate. This does not indicate
a malfunction.
Sound generated during opera-
tion
Operation sounds may be heard
when the engine switch is pressed
to change to ACC or ON, or when a
portable device is being detected.
This does not indicate a malfunc-
tion.
Situations in which the wireless
charger may not operate cor-
rectly
In the following situations, the wire-
less charger may not operate cor-
rectly:
When a portable device is fully
charged
When a portable device is being
charged by a wired connection
When there is a foreign object
between the charging area and
portable device
When the temperature of a porta-
ble device becomes high while
charging
When the temperature near the
charging tray is 95°F (35°C) or
more due to being in direct sun-
light, etc.
When a portable device is placed
with its charging surface facing up
The small portable device such as
foldable type is placed in an area
misaligned from the charge area
When a portable device is larger
than the charging tray
When the vehicle is near a TV
tower, electric power plant, fuel
station, radio station, large dis-
play, airport, or other facility that
generates strong radio waves or
electrical noise
The electronic key is not inside the
vehicle
When the any of the following
objects are between the charging
surface of a portable device and
the charging are:
A case or cover attached with an
uneven or tilted surface, so that
the charging side is not flat
Thick cases or covers
Thick decorations
Accessories, such as finger rings,
straps, etc.
When there is a gap between the
charging side of the portable
device and the charge area due to
a protrusion such as a camera on
the charging side of the portable
device.
When the portable device is in
contact with, or is covered by any
of the following metallic objects:
Casing which has magnet in it on
the charging side of the portable
device
Cards covered with metal, such as
aluminum foil
Cigarette boxes that have alumi-
num foil inside
Metallic wallets or bags
•Coins
Heat packs
Recorded media such as CDs and
DVDs
Metallic decorations
Metallic cases or covers
When wireless keys (that emit
radio waves) other than those of
your vehicle are being used
nearby
When 2 or more portable devices
are placed on the charging tray at
the same time
If a portable device built in S-pen
(Galaxy “Note” series etc.) used, a
portable device that inserted
S-pen is placed on the tray

Table of Contents

Related product manuals