51
1-2. Child safety
1
For safety and security
*2
:The child restraint systems men-
tioned in the table may not be
available outside of the EU area.
*3
:The displayed mark may differ
depending on the product.
■ Compatibility of each seat-
ing position with child
restraint systems
*1
:Move the front seat fully rear-
ward. If the passenger seat
height can be adjusted, move it
to the upper most position.
*2
:Adjust the seatback angle to the
most upright position. When
installing a forward-facing child
seat, if there is a gap between
the child seat and the seatback,
adjust the seatback angle until
good contact is achieved.
*3
:If the head restraint interferes
with your child restraint system,
and the head restraint can be
removed, remove the head
restraint.
Otherwise, put the head restraint
in the upper most position.
*4
:Not suitable for child restraint
systems with support leg.
*1, 2, 3, 4
*2, 3
*2, 3, 4
*2, 3
Suitable for “universal” cate-
gory child restraint system
fixed with the seat belt.
Suitable for child restraint
systems given on recom-
mended child restraint sys-
tems and compatibility table.
(P. 53)
Suitable for i-Size and ISO-
FIX child restraint system.
Includes a top tether anchor-
age point.
To Next Page
Loading...
