Toyota Highlander Hybrid 2013 User Manual

183
2-1. Driving procedures
2
When driving
Power (ignition) switch (vehicles with smart key system)
Performing the following operations when carrying the electronic
key on your person starts the hybrid system or changes “POWER”
switch modes.
■ Starting the hybrid system
Check that the parking brake is set.
Check that the shift lever is set in P.
Sit in the driver’s seat and firmly depress the brake pedal.
The “POWER” switch indicator turns green. If the indicator does
not turn green, the hybrid system cannot be started.
Press the “POWER” switch.
The hybrid system can be
started from any “POWER”
switch mode.
After a while, the “READY”
indicator comes on with a beep
sound.
The vehicle can move when
the “READY” indicator is on
even if the engine is stopped.
Check that the “READY” indicator is on.
The vehicle will not move when the “READY” indicator is off.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5

Toyota Highlander Hybrid 2013 Specifications

General

Brand	Toyota
Model	Highlander Hybrid 2013
Category	Automobile
Language	English