Need help?Do you have a question about the Toyota Land Cruiser 70 2017 Series and is the answer not in the manual?
General| Brand | Toyota |
|---|---|
| Model | Land Cruiser 70 2017 Series |
| Category | Automobile |
| Language | English |
Ensure compliance with all national and international laws, safety, and emissions standards for modified vehicles.
Maintain original vehicle performance and safety standards after body modifications.
Critical safety components must not be altered, welded, reinforced, machined, or heated.
Prepare and install manuals for operation, maintenance, and inspection of altered vehicles.
Establish an appropriate after-sale service system for modified or newly built parts.
Understand the meaning and components of the vehicle's model code for identification.
Do not modify engine or engine compartment components to prevent malfunctions.
The vehicle frame must not be modified; use standard deck mounts when performing conversions.
Avoid altering suspension components; adhere to tire and differential bound limits for safety.
Guidelines for building rear bodies and decks, including cargo retention and wheel housing clearance.
Readjust the Load Sensing Proportioning Valve (LSPV) after alterations to ensure correct brake performance.
Ensure sufficient clearance for transmission and propeller shaft; observe breather tube instructions.
Maintain clearance for exhaust components and protect against heat to ensure safety.
Follow precautions for battery wiring, cable routing, and mounting position for safety.
Proper fuel tank installation, maintaining minimum clearance from exhaust and muffler.
Implement preventive measures for safe mounting and modification of spare tire carriers.
Guidelines for adding or modifying electrical wiring, focusing on interference, heat, and protection.
Proper mounting of rear combination lamps, ensuring visibility, drainage, and regulatory compliance.
Mounting license plates, lamps, and reflectors according to local laws and regulations.
Detailed diagrams showing dimensions and layout of the vehicle's cab and chassis.
Illustrative diagrams of the vehicle frame, detailing dimensions and component locations.
Drawings illustrating the routing and placement of the exhaust system components.
Visual guides for the correct installation and positioning of the fuel tank.
Charts and diagrams detailing the rear combination lamp assembly and wiring.
Diagrams showing the mounting and dimensions for license lamps and plates.
Graphs illustrating the output characteristics of the vehicle's alternator at various speeds.
Provides key technical specifications applicable to vehicles for general international markets.
Lists specific technical specifications for vehicles intended for the Australian market.
To Next Page