186
3-2. Using the audio system
Fast-forwarding and reversing tracks
To fast-forward or reverse, press (reverse) or (fast-for-
ward).
Scanning tracks
Press .
The first ten seconds of each track will be played.
Press again when the desired track is reached.
Selecting a CD (type A with a CD changer and type B)
■ To select a CD to play
To select the desired CD, press
(∨) or (∧).
■ To scan loaded CDs
Press and hold until you hear a beep.
The first ten seconds of the first track on each CD will be played.
Press again when the desired CD is reached.
Repeat play
■ To repeat a track
Press (RPT).
■ To repeat all of the tracks on a CD (type A with a CD changer
and type B)
Press and hold (RPT) until you hear a beep.
To Next Page
Loading...
