295
Touch the “TEMP” switches and hold ei-
ther one until the maximum figure or mini-
mum figure appears.
If manual fan speed control is desired—
27p159
Type 1 and Type 2
27p114a
Type 3
1. Fan speed at low
2. Fan speed at high
The fan speed can be set to your desired
speed by touching the appropriate air flow
control switch. The higher the fan speed
is, the more air is delivered. Touching the
“OFF” switch turns off the fan.
To remove exterior windshield frost, use the
high speed setting.
The selected mode is highlighted in green.
To Next Page
Loading...
Need help?
General
