53
OVERVIEWELECTRIC VEHICLE SYSTEMFEATURES & OPERATIONSTOYOTA SAFETY SENSE
SAFETY &
EMERGENCY FEATURES
AHB is a safety system designed to help drivers see more of what’s ahead at
nighttime while reducing glare for oncoming drivers. When enabled, AHB uses a
forward-facing camera to help detect the headlights of oncoming vehicles and tail
lights of preceding vehicles, then automatically switches between high and low
beams as appropriate to provide the most light possible and enhance forward
visibility. By using high beams more frequently, the system may allow earlier
detection of pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
Automatic High Beams (AHB)
1VTIUIFMFWFSBXBZGSPNZPVXJUIUIFIFBEMJHIUTXJUDIJTJOUIFi"650wPSi
” position.
%FQSFTTUIF"VUPNBUJD)JHI#FBNi
” switch.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off and the high beam indicator “
” turns on.
When all of the following conditions are met, the high beams will be automatically
UVSOFEPOBGUFSBQQSPYJNBUFMZTFDPOE
t7FIJDMFTQFFEJTBCPWFBQQSPYJNBUFMZNQILNI
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
• There are few street lights on the road ahead.
If any of the following conditions occur, the high beams will be automatically turned off:
t7FIJDMFTQFFEESPQTCFMPXBQQSPYJNBUFMZNQILNI
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
"$5*7"5*/(5)&")#4:45&.
$0/%*5*0/48)&3&")#8*--563/0/0''"650."5*$"--:
To Next Page
Loading...
Need help?
General
