Van specifics: Load restraints behind the passenger space
Increased adjustment range for the driver's seat:
- Compared to a seat fully withdrawn against the standard partition, the comfort partition enables the seat back to be tilted by an
additional 8.5°.
- compared to the standard partition, the comfort partition can be withdrawn by an additional 40 mm.
These increases do not change the max. useful floor lengths, since the lower part of the comfort partition is the same as
on the standard partition.
The useful length in the upper part of the load space (above approx. 40 cm from the floor) is reduced by 11.6 cm.
Comfort partition (cont'd)
Comfort
partition
Standard
partition
Tilt
+ 8.5°
Additional seat back tilt:
Seat back
against
standard
partition
Seat back
against
comfort
partition
Additional seat withdrawal range:
Withdrawal range
+ 40 mm
Seat withdrawn
fully with standard
partition
Seat
withdrawn
fully with
comfort
partition
-116 mm load
length at approx. 1 m
from the floor
Same useful floor length
129