Toyota RAV4 Hybrid 2020 - Bluetooth Phone Message Function

488
5-13. Phone operation (Hands-free system for cellular phones)
current call is placed on hold.
 When there is no current call,
but there is a call on hold:
“Activate” is displayed. When
selected, the system switches
to the call that was on hold.
 When there is another call on
hold during a call: “Swap
Calls” is displayed. When
selected, the current call is
placed on hold, and the sys-
tem switches to the call that
was on hold.
● This function may not be available
depending on the type of cellular
phone.
When a call is interrupted by a
third party while talking, the
incoming screen is displayed.
1 Select “Answer” or press the
switch on the steering
wheel to start talking with the
other party.
 To refuse to receive the call:
Select “Decline”.
 Each time “Swap Calls” is
selected, the party who is on
hold will be switched.
● This function may not be available
depending on the type of
Bluetooth
®
phone.
1 Display the phone top
screen. (P.477)
2 Select “Message”.
 A confirmation message
appears when the “Automatic
Message Transfer” function is
set to off (P.501), select
“Yes”.
3 Check that the message
screen is displayed.
“Phone”: Select to change to phone
mode.
 The account name is dis-
played on the left side of
Incoming call waiting
Bluetooth
®
phone
message function
Received messages can be
forwarded from the con-
nected Bluetooth
®
phone,
enabling checking and
replying using the system.
Depending on the type of
Bluetooth
®
phone con-
nected, received messages
may not be transferred to
the system.
If the phone does not sup-
port the message function,
this function cannot be
used. Even when the sup-
ported phone is used, reply
function may not be used.
Displaying the message
screen