354
5-5. Using the driving support systems
When the panoramic view
monitor (if equipped) is dis-
played
■ The RCTA function detec-
tion areas
The areas that vehicles can be
detected in are outlined below.
The buzzer can alert the driver of
faster vehicles approaching from
farther away.
Example:
■ The RCTA function is opera-
tional when
The RCTA function operates when
all of the following conditions are
met:
● The RCTA function is on.
● The shift lever is in R.
● The vehicle speed is less than
approximately 5 mph (8 km/h).
● The approaching vehicle speed is
between approximately 5 mph (8
km/h) and 18 mph (28 km/h).
■ Setting the buzzer volume
The buzzer volume can be adjusted
on the multi-information display.
(P.177)
■ Conditions under which the
RCTA function will not detect a
vehicle
The RCTA function is not designed
to detect the following types of vehi-
cles and/or objects.
● Vehicles approaching from
directly behind
● Vehicles backing up in a parking
space next to your vehicle
● Vehicles that the sensors cannot
detect due to obstructions
Approach-
ing vehicle
Speed
Approxi-
mate alert
distance
Fast
18 mph
(28 km/h)
65 ft. (20
m)
Slow
5 mph (8
km/h)
18 ft. (5.5
m)
A
To Next Page
Loading...
