32
Front passenger’s seat:
For easy access to the rear seat, use
either a seatback lock release lever or
seatback angle adjusting lever.
1. Lift up the seatback lock release lever
or seatback angle adjusting lever.
The front seat with the seatback folded
down will release the slide lock and slide
forward.
2. Move the seat to the front–most posi-
tion.
After rear passengers are in, lift up the
seatback and return the seat until it locks.
The seat and seatback will be locked in
their original position.
CAUTION
D After the seatback returns, try
pushing the seatback forward and
rearward to make sure it is securely
locked.
D Never allow anyone to touch seat-
back lock release levers while the
vehicle is moving.
13T003
1. Remove the head restraint. Hold the
center of the lever and pull it up.
Then slide the seat the front–most
lock position.
13t004
2. Pull the seatback angle adjusting le-
ver to unlock and push down the
seatback.
When returning the seatback upright, be
careful not to make yourself hit by the
seatback which will bound with consid-
erable spring force.
After returning the seat to its original
position, be certain to replace the head
restraint.
—Flattening seatback
To Next Page
Loading...
