149
2-1. Driving procedures
2
When driving
SEQUOIA_U_(L/O_0804)
Changing shift ranges in S mode
Shift the shift lever to the S position and operate the shift lever.
Upshifting
Downshifting
The initial shift range in S mode is automatically set to 5 or 4 accord-
ing to vehicle speed. However, the initial shift range may be set to 3
or 2 if the AI-SHIFT has operated while the shift lever was in the D
position. (
→P. 1 5 0 )
n Shift ranges and their functions
A lower shift range will provide greater engine braking forces than a higher
shift range.
Shift range Function
6
Automatically selecting gears between 1 and 6
according to vehicle speed and driving conditions.
5
Automatically selecting gears between 1 and 5
according to vehicle speed and driving conditions.
4
Automatically selecting gears between 1 and 4
according to vehicle speed and driving conditions.
3
Automatically selecting gears between 1 and 3
according to vehicle speed and driving conditions.
2
Automatically selecting gears between 1 and 2
according to vehicle speed and driving conditions.
1 Setting the gear at 1.
SEQUOIA_U.book Page 149 Friday, January 25, 2008 11:27 AM
To Next Page
Loading...
