59
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
SEQUOIA_U_(L/O_0804)
Driving position memory system (if equipped)
Your preferred driving position (the position of the driver’s seat,
steering wheel and outside rear view mirrors) can be entered into the
computer’s memory and recalled with the touch of a button.
Two different driving positions can be entered into memory.
n Entering a position into memory
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Adjust the driver’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
While pushing the SET button,
push button “1” or “2” until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
n Recalling the memorized position
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Push button “1” or “2” to recall
the desired position.
SEQUOIA_U.book Page 59 Friday, January 25, 2008 11:27 AM
To Next Page
Loading...
