356
3-4. Using the hands-free phone system (for cellular phone)
SEQUOIA_U_(L/O_0804)
Use one of the following methods to input a phone number:
Inputting a phone number by using voice commands
STEP2-1 Select “By voice” by using a voice command or
.
STEP2-2 Press or , say the desired phone num-
ber, and select “Confirm” by using a voice com-
mand.
Transferring data from the cellular phone
STEP2-1 Select “By phone” and then “Confirm” by using a
voice command or .
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone for
the details of transferring data.
STEP2-3 Select the data to be registered by either of the fol-
lowing methods:
a. Say “Previous” or “Next” until the desired data is
displayed, and select “Confirm” by using a voice
command or .
b. Select the desired data by using .
SEQUOIA_U.book Page 356 Friday, January 25, 2008 11:27 AM
To Next Page
Loading...
