39
1-2. Opening, closing and locking the doors
1
Before driving
SEQUOIA_U_(L/O_0804)
Automatic door locking and unlocking systems
The following functions can be set or cancelled:
n Setting and canceling the functions
Vehicles with multi-information display
→P. 1 6 7
Vehicles without multi-information display
To s w it c h bet w ee n set t in g a n d can c e li n g , fo l lo w the pr o c ed u r e
below:
Close all the doors and turn the engine switch to the ON posi-
tion. (Perform step 2 within 20 seconds.)
Shift the shift lever to P or N,
press and hold the driver’s door
lock switch ( or ) for approx-
imately 5 seconds and then
release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set or can-
celed are shown as follows.
Function Operation
Shift position linked
door locking function
Shifting the shift lever out of P locks all
doors.
Shift position linked
door unlocking function
Shifting the shift lever to P unlocks all doors.
Speed linked door lock-
ing function
All doors are locked when the vehicle speed
is approximately 12 mph (20 km/h) or
higher.
Driver’s door linked
door unlocking function
All doors are unlocked when the driver’s
door is opened within 10 seconds after turn-
ing the engine switch to the ACC or LOCK
position.
SEQUOIA_U.book Page 39 Friday, January 25, 2008 11:27 AM
To Next Page
Loading...
