Toyota SEQUOIA 2017 - Air Conditioning;Heating

23
OVERVIEWFEATURES & OPERATIONSSAFETY & EMERGENCY FEATURES
Hold wheel, push lever down, set angle and length and return lever.
Toggle the control switch to set angle and length.
NOTE: Do not attempt to adjust while the vehicle is in motion.
The VSC OFF switch is used to switch between modes related to the TRAC, VSC
and Auto LSD functions.
Refer to the Owner’s Manual for more information.
Control panel
Display
FRONT
Fan speed
Driver side
temperature
Rear temperature
Airflow vent
Passenger
temperature
Fan speed
Automatic climate control ON
Adjusting the temperature setting will
cause the airflow vents, air intake and
fan to adjust automatically.
“SYNC” button
Indicator ON: Synchronized temperature settings for
driver, front passenger and rear seats. Indicator OFF:
Separate temperature settings for driver, front passenger
and rear seats.
Air Conditioning ON/OFF
Rear temperature
control ON/OFF
Climate control OFF
Windshield defogger
(outside air only)
Temperature selector
(front passenger side)
Temperature selector
(rear passenger area*)
Recirculate cabin air
(outside air when OFF)
Temperature selector
(driver side)
Outside rearview mirror/back
window defogger or windshield
wiper de-icer (if equipped)
Airflow vent
In “
” mode, use outside
air (“ ” indicator “OFF”) to
reduce window fogging.
* To change the rear seat setting, press
the “REAR” button.
Air conditioning/heating
2017_Sequoia_QRG_r1.indd 23 10/24/16 8:26 PM