Toyota Sequoia 2018 - Wireless Remote Control Battery

424
6-3. Do-it-yourself maintenance
SEQUOIA_OM_USA_OM0C011U
Wireless remote control battery
● Flathead screwdriver
● Small flathead screwdriver
● Lithium battery CR2016
Remove the cover.
To prevent damage to the key,
cover the tip of the screwdriver with
a rag.
Remove the module.
Open the case cover using a
coin protected with tape, etc.,
and remove the depleted bat-
tery.
Insert a new battery with the “+”
terminal facing up.
Replace the battery with a new one if it is depleted.
You will need the following items:
Replacing the battery
1
2
3