34
FEATURES & OPERATIONS
Intuitive parking assist
The parking assist sonar system operates when the vehicle approaches an
obstacle. The distance from your vehicle to nearby obstacles when parallel parking
or maneuvering into a garage is measured by sensors and communicated via the
Multi-Information Display (MID) and a buzzer.
When the sensor detects an obstacle, the direction and the approximate distance
to the obstacle are displayed on the MID by illuminating continuously (near) or
blinking (far), and beeping sounds will switch from intermittent to continuous as you
approach and get closer to a detected obstacle. When the sensors detect two or
more obstacles, the audible alerts will respond to the nearest zone.
Always check the surrounding area when using this system.
Refer to the Owner’s Manual for limitations and more details.
Front corner sensors
Rear
corner sensor
Rear
corner sensor
Rear
center sensor
The rear view monitor system displays an image of the view from the bumper of
the rear area of the vehicle. The camera for the rear view monitor system is located
above the license plate.
To adjust the image on the rear view monitor screen, press the “MENU” button and
select “Display.” Select “Camera” to adjust the screen contrast and brightness.
Refer to the Owner’s Manual for limitations and more details on this system.
Rear view monitor system
To Next Page
Loading...
