44
SIENNA AAS_OM45476U_(U)
3-1. When you think a malfunction has occurred
AUTO ACCESS SEAT
If the AUTO ACCESS SEAT does not move
Reason Correction procedure
The seat belt of the AUTO
ACCESS SEAT is buckled.
Unbuckle the seat belt and try operating
the AUTO ACCESS SEAT again.
The right-hand sliding door is
not opened fully.
Open the right-hand sliding door fully.
The shift lever is in a position
other than P.
Shift the shift lever to P.
If you suspect that the AUTO ACCESS SEAT is malfunctioning, try
the correction procedures listed in the table below.
If the seat still does not operate even after trying the procedures, it is
likely that the seat is malfunctioning. Do not use the AUTO ACCESS
SEAT, and have the seat inspected by your Toyota dealer immedi-
ately.
■ If the AUTO ACCESS SEAT does not move after being
moved outside the vehicle
P. 47
■ If you think the wireless remote control is malfunctioning
P. 59
To Next Page
Loading...
Need help?
General
