To Next PageTo Next Page
Need help?Do you have a question about the Toyotomi TAN-A28IV and is the answer not in the manual?
General| Cooling Capacity | 2.8 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (Cooling) | 3.21 |
| Energy Efficiency Ratio (Heating) | 3.61 |
| Refrigerant | R32 |
| Weight (Indoor Unit) | 8.5 kg |
| Type | Split Air Conditioner |
Details operation modes, airflow selection, timer settings, and negative ion features for the remote.
Explains room temperature sensing, time delay safety, fan speed control, LED indicators, dry and deice operations.
Covers hot-start, anti-freezing, airflow direction, inverter control, and forced operation modes for the outdoor unit.
Describes how to perform emergency and test operations, including auto-selection of modes and releasing the operation.
Provides instructions on preventing signal interference when multiple indoor units are used in the same room.
Explains the detailed operation of timer functions (ON, OFF, Sleep) and airflow direction adjustments.
Details the time delay safety function for compressor protection and the operation of the cooling mode.
Describes the operational characteristics and parameters for the dry and heating modes of the air conditioner.
Explains the defrosting operation for the outdoor unit heat exchanger and the compressor starting sequence.
Guides users through troubleshooting issues based on combinations of indicator lamp statuses on the indoor unit.
Outlines specific checks, steps, and wiring diagrams for diagnosing and resolving various operational problems.
Details sensor electric characteristics and the method for displaying past errors using indicator lamps.
Provides important notes and precautions for checking gas pressure and charging refrigerant.
Lists resistance and voltage values for the room temperature sensor at various temperatures.
Provides resistance and voltage data for the heat exchanger temperature sensor across a range of temperatures.
Details resistance and voltage readings for defrost and outdoor temperature sensors at different temperatures.
Presents resistance and voltage tables for the discharge temperature sensor at various temperature points.
