Toyotomi TDN/TDG-A35VR5 User Manual

User’s Manual
Οδηγίες Χρήσης
ΚΛΙΜΑΤΙΣΤΙΚΟ ΤΟΙΧΟΥ ΤΥΠΟΥ INVERTER
WALL MOUNTED AIR CONDITIONER INVERTER TYPE
MODELS/ΜΟΝΤΕΛΑ
TDN/TDG-A28VR5
TDN/TDG-A35VR5
Thank you for purchasing our product.
Before using this product, be sure to read this Instruction Manual to ensure proper usage. Please
keep this manual for later reference.
Improper use of this product may result in a malfunction, failure, unexpected accident, or create
a potential hazard.
Ευχαριστούμε για την επιλογής σας στο κλιματιστικό TOYOTOMI.
Για τη σωστή του χρήση παρακαλούμε διαβάστε το εγχειρίδιο χρήσης προσεκτικά, πριν θέσετε
τη μονάδα σε λειτουργία και κρατήστε το σε καλή κατάσταση για μελλοντική αναφορά.

Toyotomi TDN/TDG-A35VR5 Specifications

General

Brand	Toyotomi
Model	TDN/TDG-A35VR5
Category	Air Conditioner
Language	English

Summary

Precautions

Operation and Maintenance

Safety and operational guidelines for users, including children's supervision and general maintenance.

Attachment

Emergency Operation

Cleaning and Maintenance

Cleaning the Air Filter

Detailed steps for opening the unit, removing, cleaning, and installing the air filter.

Malfunction Analysis

General Phenomenon Analysis

Troubleshooting guide for common issues like no remote response or no air emission.

Error Code Troubleshooting

Lists common error codes and their corresponding troubleshooting steps.

Selection of Installation Location

Basic Requirements & Prohibited Locations

Indoor Unit Location Criteria

Outdoor Unit Location Criteria

Electrical Connection Requirements

Safety Precautions for Electrical Connection

Essential safety guidelines and precautions to follow during electrical hookup.

Grounding Requirement

Detailed instructions on proper grounding procedures for electrical safety.

Grounding Requirements

Detailed instructions on proper grounding procedures to ensure electrical safety.

Indoor Unit Installation

Step 2: Install Wall-Mounting Frame

Step 5: Connect Pipe of Indoor Unit

Step 7: Connect Indoor Unit Wiring

Step 9: Hang the Indoor Unit

Step 3: Open Piping Hole

Check After Installation

Test Operation

Method of Test Operation

Steps to follow to test the unit's functionality after installation.

Connection Pipe Configuration

Outdoor Unit Installation

Step 1: Fix the Support of Outdoor Unit

Step 4: Connect Indoor and Outdoor Pipes

Steps for connecting the refrigerant pipes to the outdoor unit valves, including torque specifications.

Step 5: Connect Outdoor Electric Wire

Instructions for connecting power and control wires to the outdoor unit terminals.

Step 3: Fix Outdoor Unit

Vacuum Pumping

Use Vacuum Pump

Step-by-step process for vacuum pumping the refrigerant lines to remove air and moisture.

Leakage Detection

Pipe Expanding Method