Why my Toyotomi TAD-T32JW suddenly stops?
Your Toyotomi Air Conditioner might suddenly stop because the room temperature has reached the set level, so try resetting the temperature. Another reason might be that the preset timer is up; in this case, reset the timer. Also, the unit may stop if the drain tank is full, so remove the water from the drain tank.
What to do if my Toyotomi TAD-T32JW Air Conditioner is not cooling the room?
If your Toyotomi Air Conditioner isn't cooling the room, several factors could be the cause. Make sure that all windows and doors are closed. Remove any heat sources from the room, and ensure the air intake grille is clean. Replace the filter if it's dirty, and lower the temperature setting.
What to do if my Toyotomi Air Conditioner does not work?
If your Toyotomi Air Conditioner isn't working, first, ensure there isn't a power cut and wait for the power to be restored. Check that the plug is properly inserted. If the full-tank indicator is on, remove the drain water from the tank. If the LCDI plug has a current leak, press the reset button after fixing the problem.
Why my Toyotomi Air Conditioner runs intermittently?
Your Toyotomi Air Conditioner might be running intermittently due to a malfunction; in this case, contact your dealer. Alternatively, the surrounding temperature may be too high or too low, or the exhaust duct hose might be blocked. Check the duct hose in these cases.
What to do if condensed water spills when moving my Toyotomi TAD-T32JW Air Conditioner?
If condensed water spills when you move your Toyotomi Air Conditioner, it's likely that the tank is nearly full. Remove the drain plug on the rear bottom of the unit to drain the water; after draining, the unit will operate automatically.
General| Cooling Capacity | 3.2 kW |
|---|---|
| Voltage | 220-240 V |
| Noise Level | 48 dB(A) |
| Frequency | 50 Hz |
| Noise Level (Outdoor Unit) | 48 dB |
Details on cooling, heating, automatic, thermo control, timer, drain tank, and air filters.
Overview of front, rear, and remote control components with diagrams.
Essential guidelines, warnings, and cautions for safe operation.
Step-by-step guide for operation, including mode selection and settings.
Common issues, their causes, and solutions for unit operation.
Instructions for installing exhaust duct and window panel kits.
To Next Page