9
Press both buttons together to stop ight
High ,middle and low speed modes and lighting control
1. When press the “R1” button as shown above can
control the aircraft lights on and o.
2. When press the “L1” button as shown above will
switch the high,middle and low speed modes, LCD
screen will display the corresponding letters: H M L;
the buzzer will emit dierent sounds to distinguish,
a “Di” sound is low speed, “Di Di”sound is middle
speed, “Di Di Di” is high speed, th low speed mode
is suitable for the beginners learning to practice, the
medium spread is suitable for the advanced users
learning to practice, the high speed model is
suitable for the skilled users in ight.
Direction control during ight
1.Control the rise and fall
High,intermediate,
low toggle key
Light on/o switch
When you are in a state of emergency press the
“L2” and “R2” button to immediately stop the ight.
Emergency stop
To Next Page
Loading...
Need help?
General