2
Know your aircraft
●When ying, please take the aircraft head toward to
the front, so that you will be better to control the
aircraft.
●The central axis location of the blade are marked
"A" "B" blades, when the blade is damaged, please
follow the above shown picture to replace the blade,
when changing please note that two blades of the
same machine arm need to be replaced the same
numbers, such as "B1", on both sides of the blades
are required "B1", if "B2", is required "B2", so the
aircraft will be more stably ight.
Know your remote control
A Blade
A BladeB Blade
B Blade
Front
Battery cabin
power switch
To Next Page
Loading...
Need help?
General