22
Chapter 5
Set Up the Router as an Access Point
The router can work as an access point, transforming your existing wired network to a
wireless one.
1. Visit
http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced > Operation Mode, select Access Point and click Save. The router
will reboot and switch to Access Point mode.
3. After rebooting, connect the router to your existing wired router via an Ethernet cable.
4. Log in again to the web management page
http://tplinkwifi.net, and click Quick Setup.
5. Configure your wireless settings and click
Next.
6. Confirm the information and click Finish. Now, you can enjoy Wi-Fi.
To Next Page
Loading...
