TP-Link Archer D2 - Page 10

9
English
4:KDWFDQ,GRLI,IRUJHWP\SDVVZRUG"
Ɣ
:HE0DQDJHPHQWSDJHSDVVZRUG
A1. Restore the modem router to its factory default settings and then use
the default User Name ‘admin’ and Password ‘admin’ to log in.
Ɣ
:LUHOHVV1HWZRUNSDVVZRUG
A1. The factory default password can be found on the product label printed
on the bottom of the modem router.
A2. If you have changed your password, log on to the modem router’s Web
Management page, go to Wireless->Wireless Security to obtain or
reset your password.
Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/
support/faq and click Contact Technical Support for further assistance.
/(',QGLFDWRUV
:36
2Q2II It turns on when a wireless device has been
successfully connected to the network via WPS. After
about 5 minutes, the WPS LED will turn off.
6ORZ)ODVK A wireless device is trying to connect to
the network via WPS. This process may take up to 2
minutes.
86%
On: 7KH86%GHYLFHLVLGHQWL¿HGDQGUHDG\WRXVH
)ODVK 7KH86%GHYLFHLVEHLQJLGHQWL¿HG
2IINo USB device is plugged in to the USB port.
LAN
On: At least one LAN port is connected.
2IINo LAN port is connected.