TP-Link Archer GX90 Setup

Method ONE: Via TP-Link Tether App
1. Download the Tether app.
Scan for Tether
Tether
or
Method TWO: Via a Web Browser
The default wireless network names (SSIDs) and password are
printed on the label at the bottom of the router.
1. Connect your device to the router wirelessly
or with an Ethernet cable.
2. Launch a web browser, and enter
http://tplinkwifi.net or http://192.168.0.1 in
the address bar. Create a password to log in.
3. Follow the step-by-step instructions to
set up the internet connection and
register for the TP-Link Cloud service.
Note: If the login window does not appear, please refer to Q2 of Need
Help? in this guide.
http://tplinkwi.net
Let’s Get Started
Conrm Password
Password
2. Open the Tether app and log in with your
TP-Link ID.
Note: If you don’t have an account, create one first.
3. Tap the button in the Tether app and
select Gaming router > Archer GX90.
Follow the steps to complete the setup
and connect to the internet.
Choose your device type
Router
Range Extender
Archer AX6000
Set up with videos:
Scan QR code or visit
https://www.tp-link.com/support/setup-video/#wi--routers
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL /
Cable / Satellite modem, connect the Ethernet cable to the router’s 2.5 Gbps WAN/LAN port, and then
follow steps 3 and 4 to complete the hardware connection.
*Image may dier from actual product.
Connect the Hardware
1
Unplug the power to turn o your modem, if any,
and remove the backup battery if it has one.
Modem
Unplug the power
Hold the antennas from the base and
push them fully into the slots.
Internet
Connect the powered-off modem
to the router’s 2.5 Gbps WAN/LAN
port with an Ethernet cable.
1
Power on the modem, and then wait about
2 minutes for it to restart.
2
Connect the power adapter
to the router and turn it on.
3
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
SSID:TP-Link_XXXX_5G_Gaming
Wireless Password/PIN: XXXXXXXX
Verify the LED on the top is solid on (red or white) before moving on.
4
Note: If you want to use the 1 Gbps WAN/LAN port
as the WAN port instead, please refer to Q1 of Need
Help? in this guide.
Congure the Router

TP-Link Archer GX90 Specifications

General

DSL WAN	No
Ethernet WAN	Yes
WAN connection type	RJ-45
Product type	Tabletop router
Product color	Black, Red
LED indicators	LAN, Power, WLAN
Wi-Fi band	Tri-band (2.4 GHz / 5 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	6600 Mbit/s
WLAN data transfer rate (first band)	4804 Mbit/s
WLAN data transfer rate (third band)	574 Mbit/s
WLAN data transfer rate (second band)	1201 Mbit/s
Antennas quantity	4
VPN server	OpenVPN, PPTP
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Number of guest networks (5 GHz)	1
Certification	FCC, CE, RoHS
Processor frequency	1500 MHz
Output current	5 A
Output voltage	12 V
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	5
Cables included	LAN (RJ-45)
Supported network protocols	IPv4, IPv6
Harmonized System (HS) code	85176990

Weight and Dimensions

Width	212 mm
Height	51.8 mm