TP-Link Deco E4 - Appearance

2
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation
below:
Tip: The product label can be found at the bottom of the product.
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
White pulse:
White solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Ethernet Ports:
For connecting Deco to your modem, the
Ethernet outlet or other internet devices.
Reset Button:
Press for 1 second and release to reset Deco to
factory default settings. The light turning pulsing
yellow indicates a successful reset.
Power Slot:
For connecting Deco to the power socket via
the provided power adapter.