11
1. In Overview, tap
. 3. Tap to remove or reboot the Deco.
Note: If the LED light of Deco does not turn pulsing blue after tapping Remove, press the Reset
button on the Deco for 1 second to reset it.
2. Select a Deco unit.
Remove/Reboot Deco
You can remove or reboot your Deco easily in the Deco app. Follow the steps below.
Note: Removing a Deco will reset it to factory default settings and you will need to set up your Deco again. You can also press the Reset button on the Deco for 1 second to quickly reset your Deco to factory
default settings.
To Next Page
Loading...
