TP-Link kasa EP25P4 - Prerequisites for HomeKit Setup; Step-by-Step HomeKit Setup

7
Add Your Device to the Apple Home App
This is a HomeKit-compativle device. You can add it to the Kasa Smart app or the Apple Home app.
Before You Start
• Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
• Ensure your iPhone/iPad, HomeKit device, and Apple home hub* (if any) are connected to the same Wi-Fi network.
*The hub like HomePod, HomePod mini, and Apple TV helps control your HomeKit devices remotely, share the devices with others, and
automate your devices to do tasks for you.
• To control the HomeKit-enabled device in the Apple Home app, the latest iOS or iPadOS version is highly recommended.
• Find the HomeKit QR code or numeric code on your device or in its packaging. After setup, you can save the code in Device Settings in
the Kasa Smart app.
How to Set Up
1. Factory reset your Kasa device.
2. Open the Apple Home app.
If you have added your smart device to the Kasa Smart app, you can go to Device Settings > Add to Home in the app.
3. Scan the HomeKit QR code or enter the provided numeric setup code.
4. Follow the instructions in the app to complete setup.