4
Appearance - Doorbell
The doorbell has a ring button, a status LED, and a microSD card slot. Refer below for details.
Front Back
Ring Button
Press the button ring the
doorbell.
Camera
It allows live view.
System LED
• Solid orange:
Starting up.
• Blinking orange & green:
Ready for setup.
• Blinking red:
Connecting to home Wi-Fi; or
Disconnected from home Wi-Fi
• Blinking green slowly:
Connected to home Wi-Fi
• Solid green:
Connected to cloud
• Blinking green quickly:
Updating
microSD Card Slot
Insert a microSD (8-128GB) card into
the slot for recording.
Reset Button
Press and hold for 3s until the status
LED blinks orange slowly to reset Wi-Fi
connection.
Press and hold for 15s until the status
LED blinks orange quickly to restore to
factory default settings.
To Next Page
Loading...
