3.75G HSUPA USB Adapter
MODEL NO. MA180
Package Contents
QIG
3.75G HSUPA USB Adapter
MODEL NO. MA180
MA180
Quick Installation Guide
Software Installation
Hardware Installation
Open the cover.
1
The following window will automatically appear
on your desktop. Click the Run AutoRun.exe.
1
3
System Requirement
Operating System： Windows 7/Vista/XP 32/64-bit
CPU: 500MHz Pentium or above
Hard Disk: 20G or above
RAM: 128M or above
1
2
Insert the SIM/USIM card and the Micro SD card in the direction indicated on the Adapter.
A Micro SD card is an optional accessory. You need to buy one yourself. To remove the
Micro SD card, press it to eject it from the Adapter.
3
Replace the cover.
4
Plug the Adapter directly into the USB port on your computer．
1
2
3
4
2
3
The InstallShield Wizard window will
appear. Click Next to continue.
4
Click Change to specify the destination
you wish the application to be located
or leave it in the default location. Click
Next to continue.
5
Click Install to begin the installation.
6
The installation process may take 1~2
minutes. Please wait.
The following screen will then appear.
Click Finish to complete the setup.
(The installation procedures in Windows 7/ Vista/ XP are similar. Here we use the procedures in Windows 7 as an example.)
7106503935
After installation, the
icon will appear on
your desktop. Double-
clicking the icon can
start the utility.
2
LED Explanation
LED
Status
Flashing Red
Indication
No SIM/USIM card is inserted.
Solid Red
Flashing Green
The SIM/USIM card has registered to
the network.
Solid Green
The network is available with a
successful Internet connection.
The Adapter is initializing.
Micro SD Card
SIM/USIM Card
To Next Page
Need help?
General
