English
8
•Make sure your computer is connected to the extender’s network.
•Change the computer’s fixed IP address to Obtain an IP Address
Automatically.
5. How do I restore the extender to its factory default settings?
With the extender powered on, use a pin to press and hold the
Reset button at the bottom of the unit, until all LEDs start flashing
once then release the button.
Technical Support
For detailed troubleshooting instructions, visit:
www.tp-link.com/en/support/faq
For all other technical support, please contact us at:
USA / Canada
Tell Free: +1 866 225 8139
E-mail: support.usa@tp-link.com(USA)
support.ca@tp-link.com(Canada)
Support Availability:24 hours a day, 7 days a week
To Next Page
Loading...
