English
LED Indicators
LED STATUS INDICATION
2.4G Green The 2.4GHz network is configured.
Flashing green The extender is in SoftAP mode.
Off The 2.4GHz network is not configured.
5G Green The 5GHz network is configured.
Flashing green The extender is in SoftAP mode.
Off The 5GHz network is not configured.
Status Green The extender is connected and in a good signal location.
Red The extender is connected, but in a poor signal location.
Flashing green Adding the extender or when the extender is
disconnected from your router.
Flashing amber and green When pressing the Reset button for 5 seconds to reset
the Wi-Fi settings and enter SoftAP mode.
Flashing amber rapidly When pressing the Reset button for 10 seconds to
factory reset the extender.
Off No active connection.
Power Green The extender is plugged into an active power outlet.
Flashing green Initalizing.
Flashing green rapidly Upgrading firmware.
2.4G
5G
Status
Power
4
To Next Page
Loading...
