Need help?Do you have a question about the TP-Link RE550 and is the answer not in the manual?
General| Storage temperature (T-T) | -40 - 70 °C |
|---|---|
| Operating temperature (T-T) | 0 - 30 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Type | Network transmitter & receiver |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum transfer distance | - m |
| Windows operating systems supported | Yes |
| Sustainability certificates | CE, RoHS |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | 64-bit WEP, 128-bit WEP, WPA-PSK, WPA2-PSK, WPS |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Antenna type | External |
| Antennas quantity | 3 |
| Transmitting power (CE) | 2.4 GHz ≤20dBm, 5 GHz ≤23dBm dBm |
| Package type | Box |
| Package depth | 125 mm |
| Package width | 202 mm |
| Package height | 86 mm |
| Package weight | 350 g |
| Product color | White |
| Quantity per pack | 1 pc(s) |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (max) | 10 W |
| Ethernet LAN (RJ-45) ports | 1 |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 76.4 mm |
|---|---|
| Width | 163 mm |
| Height | 66.5 mm |
Outlines three methods for initial setup: Tether App, Web Browser, WPS.
Explains the unified Wi-Fi network and its benefits.
Guides on enabling OneMesh via Tether app or web browser.
Instructions for registering a new TP-Link ID and binding it.
Using the Tether app to manage your extender remotely.
Extend another network, change SSIDs, or hide broadcasts.
Modify the extender's IP address and subnet mask.
Optimize performance by disabling one wireless band.
Set up the extender to function as an Access Point.
Instructions for online and local firmware updates.
Back up, restore, or factory reset extender configurations.
To Next Page
