What to do if I forget my TP-Link Extender password?
If you've forgotten your login password for your TP-Link Extender, you can restore the extender's configuration to its factory default settings. Alternatively, try using the default username and password: admin, admin. You might also try reconfiguring your extender by following the instructions in this guide.
How to factory reset TP-Link RE580D?
To restore your TP-Link Extender's configuration to its factory default settings, power on the extender, then use a pin to press and hold the RESET button until all LEDs turn on momentarily; then release the button. Alternatively, you can restore the default settings from the 'System Tools > Restore & Backup' section of the extender's web-based management page.
Why is my TP-Link Extender speed so slow?
The wireless transmission rate may slow down on your TP-Link Extender because, in compliance with the wireless transmission protocol, all extender devices are set to work in half-duplex instead of full-duplex mode. TP-Link recommends connecting to the extender when your home network connection is poor, or when you want larger wireless coverage to eliminate 'dead zones'.
What to do if I cannot access TP-Link RE580D configuration page?
If you cannot access the web-based configuration page for your TP-Link Extender, first check that all connections (wireless or wired) are properly established. Then, try to obtain an IP address and gateway. If successful, open your web browser, enter the default domain http://tplinkrepeater.net in the address field, and log in. As another option, you can reset the device and then use the default IP address to access the web-based configuration page and reconfigure the device.
General| Type | Network transmitter |
|---|---|
| Maximum transfer distance | - m |
| Windows operating systems supported | Yes |
| Certification | CE, FCC |
| Antennas quantity | 3 |
| Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100/1000Base-T(X) |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA2-PSK |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Wi-Fi data rate (max) | 1900 Mbit/s |
| Ethernet LAN (RJ-45) ports | 5 |
| Output current | 2.5 A |
| Output voltage | 12 V |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 30 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package depth | 240 mm |
| Package width | 340 mm |
| Package height | 76 mm |
| Sustainability certificates | RoHS |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Depth | 162 mm |
|---|---|
| Width | 242 mm |
| Height | 44 mm |
Provides an overview of the RE580D AC1900 Wi-Fi Range Extender's purpose and benefits.
Explains the device's support for 802.11ac standards and its advantages.
Lists the main functionalities including security, DHCP, and management.
Details the physical layout, LEDs, ports, and buttons on the extender.
Explains the meaning of each LED light on the extender for status indication.
Describes the function and usage of the extender's physical buttons like Reset and WPS.
Guidance on selecting an optimal location for the extender for best wireless performance.
Lists essential environmental and operational conditions for the extender.
Step-by-step instructions for a fast setup using the WPS button.
Covers WPS connection confirmation, troubleshooting, and relocating the extender.
Provides instructions for connecting to the extender and logging in via a web browser.
Details creating an admin account and selecting the correct region for setup.
Guides on selecting the 2.4GHz and 5GHz host networks and entering passwords.
Covers setting SSIDs, verifying, and completing the extender setup.
Instructions on repositioning the extender for improved wireless coverage.
How to view the extender's connectivity status via the web interface.
Explains how to view details of the host network, extender, and connected clients.
Steps to connect the extender to another wireless network.
Detailed process of selecting a network to extend and entering credentials.
Options to enable/disable wireless, set SSIDs, and hide broadcast.
Guide to changing the default username and password for security.
How to restrict access to the extender's network using Blacklist/Whitelist.
Details on adding devices to the blacklist and enabling access control.
Explains Whitelist mode and how to manage (modify/remove) devices.
Instructions for manually assigning a specific IP address to the extender.
Explains and guides the setup of the DHCP server for network clients.
How to view the list of clients assigned IP addresses by the DHCP server.
Explains the information displayed in the DHCP client list.
How to use the extender to connect wired devices to a wireless network.
Instructions on how to turn off extender LEDs automatically at scheduled times.
Steps to download and install new firmware to update the extender.
How to save and restore the extender's settings for recovery.
Procedures for resetting the extender to its original factory settings.
How to access and view system logs for diagnostic purposes.
Options for filtering, refreshing, and saving system logs.
Procedures for restarting the extender and securely logging out.
Lists the default username, password, IP address, and wireless settings.
Provides solutions for common problems encountered with the extender.
Detailed technical specifications including standards, bands, and data rates.
Definitions of key terms used in wireless networking and the manual.
To Next Page
